Brake clutch pedal assembly

I thought I had a brake clutch pedal assembly out of a mustang II but didn’t happen. Has anyone used this assembly from another vehicle? Thanks for any info you can provide.

yeah, i kinda thought that would be hard to get. Ever since the Mustang II entered collector status seems most everything is scarcer.
Hopefully, there's a MX owner here that can verify.
Pretty sure the MX used the pedals from a Fox body car. That info should be in the later build manual.

I may have the old pedal assembly that came in my car. It was a MII I think, but it had been shortened by as I recall. lif you're interested let me know and I'll attempt to locate in my hoarders dungeon.

Yes I am interested. Thanks and please let me know when you find it.

If Hotrod doesn't have the brake/clutch assembly I think I may have what I believe to be an unaltered set from a ‘78 Mustang. I probably have an accelerator pedal as well - I need to check. I installed a set from a ‘15 Mustang in my build. I have a few other things from the MX build sheet that I didn't use (heater, front brakes, rear turn signals……. I'll check if interested.

Update: I found a modified accelerator pedal, but not the brake/clutch assembly - sorry.

Yes Steve I actually do need all three pedals and parking brake lever.
I’m trying to get as much as possible together before I start the build.
I’m going to get the frame powder coated first.
I have a rear 11” disc brake conversion kit for the 8” rear end.
I am looking for an 11” disc brake kit for the Mustang II front end.

I used a 11" disc brake set up from Speedway on the front of my Sebring MX.