Austin-Healey Replica Forum
You are not currently logged in and therefore do not have permission to view the full site. Please log-in or register. Not registered yet? Become a member of the Austin-Healey replica forum to access all of its features and disable advertisements.
Austin-Healey Replica Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Firewall position

Go down

Firewall position Empty Firewall position

Post by MC247 on Thu Apr 27, 2017 9:49 am

In the manual it states that the firewall is to be placed 53 1/4" from the rear of the outrigger. However, when I place the firewall onto the mark its pretty much butting up against the end of the transmission tunnel and pretty close to the cross bar supports to the outside of the frame. But when i look at other builds, you seem to have more clearance in front of the firewall and can see the floor pan. So not sure if the position if mine is 100%.


Posts : 70
Join date : 2016-10-11
Age : 51
Location : Ontario

Back to top Go down

Firewall position Empty Re: Firewall position

Post by David V. on Fri May 05, 2017 5:12 pm

I might be able to help you with that by looking at my own car next weekend, but you'd need to post a picture describing what you mean more accurately so I can be sure what I'm measuring.

David V.
David V.

Posts : 775
Join date : 2014-05-27

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum